Sold
Techne Prime Thermal Cycler Techne Prime Thermal Cycler Techne Prime Thermal Cycler Techne Prime Thermal Cycler Techne Prime Thermal Cycler
Techne Prime Thermal Cycler
Techne Prime Thermal Cycler
Techne Prime Thermal Cycler
Techne Prime Thermal Cycler
Techne

Techne Prime Thermal Cycler

Enquire for availaibility

TEMPERATURE

Block temperature range: 4ºC (10°C during cycling) to 100ºC

Block uniformity (at 55ºC): <±0.3ºC

Temperature accuracy (at 55ºC): <±0.25ºC

Pre-run sample cooling: Yes, 4ºC

Temperature set point adjustment: 0.1ºC

HEATING/COOLING RATE

Maximum heating rate: 3.4ºC/s

Minimum heating rate: 0.1ºC/s

Maximum cooling rate: 1.0ºC/s

Minimum cooling rate: 0.1ºC/s

HEATED LID

Selectable heated lid temperature: 35 to 115ºC or off

Lid uniformity: ±5ºC

Pre-heat lid: Yes

Warm up time from ambient: <2 min

Over-temperature cut-out: Yes

Regulated heated lid pressure: Manually adjustable

The heated lid is only operational if the block temperature is set above 35ºC

PROGRAMMING

Program interface: 5.7” colour VGA LCD touch screen

Maximum number of programs stored: 1000

Maximum number of stages per program: 10

Maximum number of steps: 10

Maximum number of cycles per stage: 99

Programmable ramp rate: Yes, 0.1ºC/s steps

Maximum hold time: 4h 59m 59s

Minimum hold time: 1s

Incremented/decremented temperature: Yes

Incremented/decremented time: Yes

Pause facility: Yes

Program naming: Alpha numeric plus symbols

Password protection: Yes

Keyword selection: Yes

Run completion time: Yes

End of program alarm: Yes

Auto resume on power failure: Yes, always or never

Oligonucleotide Tm calculator: Yes, based on the Nearest-Neighbour method

COMMUNICATION PORTS

USB port on front of unit: Connection for USB memory stick

USB port on rear of unit: Connection for servicing and calibration only

DIMENSIONS

Height (mm): 240

Width (mm): 240

Length (mm): 420

Weight (kg): 9.4

POWER

Voltage: 100-240V, 50/60Hz

Power: 425W


Code:7941300