Thanks to its compact design, the HT 43 temperature controller is a universal controller in machine, system and apparatus applications. In the design of this device, particular attention was paid to making its handling simple and comprehensible.
The controllers are permanently configured ex works and require no further reprogramming.
The contactless switching power is 2300 Watt.
Height - 7cm
Width - 24cm
Depth - 10cm
Weight - 250g
Both long appliances heat when attached to box
230 Volt AC / 60 Hz, option 115 Volt
2300 Watt, 10 A
Fe-CuNi (J), NiCr-Ni (K) with reference point compensation, sensor breakage protection and sensor polarity control PT100 2-wire DIN/IEC
0.1 % – 0.2 % of full range
elect. switch (controller) (10 A), triac
alarm output relay 6 A, limit comparator Y3, ±10 K from setpoint, alarm output limit contact set to max. temperature range, Y2
Display actual/target value
4-digit LED display (13 mm)
7 LED ±12°C flashes
foil keypad 4 push buttons
160 x 80 x 55 mm (L x W x H)
Mounting plate dimen- sions
160 x 100 mm H x W / serves as a heat sink
4 bores for M4 screws
IP65 (EN 60529), protection class I
6+PE-pin socket, mains cable 1.2 m, 1 x for signal outputs, KV screw connectors